How Many Times Can You Reload 223 Brass? Easy Tips in 2023

When we think of cartridge shells, the first thing that comes to our mind is the use of brass. The durability and resistance to corrosion make brass an ideal option for ammunition shells.

But what makes brass a sustainable pick is its ease of reloading. If you opt for a decent 223 brass, you can get ample resue out of it without facing any risk factors.

As individuals get introduced to the world of firearms, there is a common query. And that is- “How many times can you reload 223 brass?”

Well, the answer is not definite and is dependent on multiple factors. Still an all, we went for thorough research and tried to look for answers.

Here, we will share all that we learned about brass case reloading. Let’s begin!

Rifle Brass- Safe or Unsafe?

Many beginners are skeptical about the risk factors of gun reloading. Well, the thought of the safety of reusing brass is quite reasonable.

Nevertheless, there is nothing to worry about reloading brass shells. Are you a beginner at using firearms? Then you can find expert advice on how to grip a revolver here.

Like any other metal, brass wears off. However, it will take a lot of usages to get to that stage.

In most cases, consumers buy the once used brass shells. On that account, the probability of an accident is minimum.

Whenever you are out to buy these shells, we recommend inspecting these shells beforehand. That way, there are lesser chances of having any flaws.

How Many Times Can You Reload 223 Brass?

Now, let us focus on the main query- “How many times can you reload 223 brass?”

Well, it comes down to the built quality of the brass cartridge. The quality of the brass determines the times you can reuse the same brass case. It can be once, ten times, or way more times.

Nevertheless, it would not be wise to reuse the cheap 223 brass shell. Using such a cartridge might have explosive consequences.

On the other hand, you can get a lot of use from a competent brass. Make sure you trim or reformat the case at regular intervals. Over usage, the brass shell gets thinner to carry propellant. That is the time you should stop using the shell.

There are a few other factors that determine the usability of 223 brass. Let’s explore them.

Quality of the Alloy

The durability of the shell is proportionate to the quality of the brass alloy. You cannot expect a top-notch reload from a random manufacturer.

To attain desired results, we recommend going for high quality brass. This little expense is going to pay off in the long run. Besides, you can find our picks for the choke for 00 buckshot in this link.

Brass Dimensions

Checking the size of the brass case is crucial as it might affect the reloading. The caliber size and pressure application are directly proportional.

A larger caliber applies more pressure with every shot. With every usage, the casing expands. Hence, it is ideal to opt for a compact casing.

Type of Artillery

For the most part, the reloading of the brass case depends on the type of firearm you use. You have to do the reshaping depending on the sizing that fits the gun.

If the artillery demands a full-length size, you need to resize the case accordingly. The same goes for guns with smaller necks.

Nonetheless, avoid reshaping the entire structure. That way, you can increase the wear factor of the 223 brass case.

Temperature Control

When working with reloaded brass cases, always go for a temperature check beforehand. Why? Let’s find out.

There is no doubt that the excess temperature elevates the velocity. However, it causes maximum corrosion to the shell. That will ultimately require more powder than usual.

Does Reloading Affect the Shooting Accuracy?

There can be no comparison between factory-made and reloaded brass cases. The shooting accuracy of reloaded brass is way higher than the factory ones.

Having that said, we recommend reloaded brass for bench rest shooters. Another common query that we often get is- “How Many Grains of Powder in a Shotgun Shell?” You can find some information by clicking here.

This kind of shooting requires the highest degree of precision for packed targets. You cannot achieve such precision while using factory-made bullets.

How to Reload Your 223 Brass Case?

Lastly, we will talk through the process of reloading a 223 Brass Case.

As the case is already been used, there is some residue left in there. Hence, the first step will be to clean up the brass range.

This step will take the most time and effort in the entire process. So, we suggest cleaning the cases beforehand.

Using a defective brass case can lead to accidents. On that account, check if there is any flaunt in the dried case. If you find any of those, skip on that case.

Now resize the case using some lubricant and sandpaper. Once done, trim the edges and fill the case with ammunition powder.

Close the end and go for a final inspection. With that, the brass case is ready for another round of use.

Final Words

If you have made it to this point, you probably have an all-around idea about brass loading counts. From now on, you can review the condition of the gun. Counting the brass is no longer an issue.

We have tried to address most queries related to reloading a rifle brass. However, there is a lot more to know about its utility. If you are interested to learn about this topic, let us know. We would love to write about it.

Till then, stay safe!